HVAC Code Lookup

LG Mini-Split Code CH29

Hard lockoutShown as: Outdoor LED01 (red) blinks 2 times, LED02 (green) blinks 9 times

Compressor phase overcurrent - the current into the compressor windings is higher than allowed. Same family of faults as CH21: overload, restricted airflow, low charge, or a failing compressor.

Manual wording: “Compressor phase overcurrent error

Documented for: All LG residential mini-split outdoor units

Likely causes, most common first

  1. Overload operation - indoor or outdoor fan restricted, screened or blocked, or a refrigerant cycle issue
  2. Refrigerant leak
  3. Disconnection or short circuit inside the compressor
  4. Compressor failure
  5. Burned parts inside the PCB (IPM failure)

What you can safely check yourself

  • Clear leaves, grass clippings, snow, or debris away from the outdoor coil and fan
  • Remove anything stacked against or on top of the outdoor unit
  • Check and clean the indoor air filters
  • Make sure the indoor supply and return grilles are open and unblocked

When to call a technician

If airflow is clear and CH29 returns, the compressor or inverter board needs a technician. The service manual notes CH29 can also be triggered simply by an overloaded system running in extreme conditions.

A LG mini-split throwing this code repeatedly has a reason — clearing the code without fixing the cause just hides it.

Sources

Other LG codes